![[Laser cut and engrave] Leather tray with Spartan helmet and Galatians 5:1 quote](https://storage-us.atomm.com/resource/xart/result/218859/b7d279b1-284a-474d-838a-c99d04766da7.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Stand Firm Leather Tray
Instruction
Information
Leather tray with Bible verse Galatians 5:1
Instruction
Step1
Insert material onto honeycomb Panel. This leather tray is from the Xtool materials page.
Step2
Unsnap the clips and flaten out the tray, Mark your working area with the rectangle option, use the fold lines as the perimeter.
Step3
Load the file and center on workspace. Verify the correct settings for your machine. I ran this project on the S1-20W. Feel free to adjust the power and speeds to your liking. I found 35 power and 225 speed. Stucki bitmap and 100 lines per cm.
Step4
Run the project,around 15-20 minutes depending on the name you enter. I input enter custom name so you can adjust to you or your client needs.
Step5
Remove the project and snap the clips together.
Step6
Set on your nightstand to store all your goods straight from your pocket to the catch-all tray.
