![[Laser cut and engrave] Dice Baseball Game](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/b0abb29d-97bf-485d-aaa3-99ee3d3ee4a4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Dice Baseball Game
Instruction
Information
My twist on the classic baseball dice game/ added walls to make it feel more like a baseball stadium.
Instruction
Step1
This project can fit on 2 - 12x12 Sheets- Load one onto the honeycomb and load the file.
Step2
Use the measure operation to measure the material, then mark the working area with the rectangle option.
Step3
For the first sheet, fit the field (with lines and markings) and the pegs onto your working area. I disable the base layer and the wall pieces.
Step4
Run this section and set aside
Step5
Load another 12x12 sheet and mark your working area again using the rectangle option.
Step6
Disable the pieces you ran for sheet 1 and enable the remainder- Field base and wall pieces.
Step7
Run this portion - the parameters set are for the S1-20W.
Step8
Glue the base and the field with markings together- this will be 6mm deep- let dry.
Step9
Insert the back wall pieces as shown in the image- These pieces are for scorekeeping/rules/ and innings.
Step10
2- Dice are needed to play this game and the instructions are on the left field wall-
Follow normal baseball rules.
There are enough pegs for :
4 home and 4 away players
Inning tracker
Home and Away Score
Outs tracker
