Report
![[Laser cut and engrave] 2 Layered Acrylic Pumpkin](https://image-res.xtool.com/ali-res/community/making/0b8736c6-1d9f-44d0-b365-6cae51e8cad2/PXL_20230920_151511684.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
2 Layered Acrylic Pumpkin
Remix
Instructionpumpkin
.xcs
Show 1 more
Application scenario
Laser (20min)
Machine & module
xTool D1 Pro
20WMaterial used
paint,
Transparent Acrylic
197
3014
Information
This is a Deviation of a wood pumpkin but I redid it using acrylic so it could withstand the outdoor elements.
This remix is based on
The original work has been deleted or is no longer accessible.
Instruction
1
Step1: Design Changes
Preview
Preview
This file was set up to be crated from wood, I changed this to acrylic, 1 sheet of brown and 1 sheet of orange. Both sheet were originally black cast but were painted to their respective colors prior to placing them in the laser machine. with a coat of paint the black cast cuts just as nice as original black.
2
Step2: laser settings for Acrylic
Preview
The D1 20w pro can cut this thin acrylic with ease, the settings for this acrylic is as follows 100% power 10mm/s speed @ 1 pass.
3
Step3: finishing
Preview
Preview
Preview
Preview
once both colored acrylic was cut in the machine a spray adhesive was used to bond the 2 together, now that this pumpkin is made from acrylic it can withstand the outdoor elements much better and longer than the original wood design. woot woot for Deviation…..
Comments