Report
![[Laser cut and engrave] Storage Box](https://image-res.xtool.com/ali-res/community/how-tos/vc-upload-1666010273583-4_ce7361f0-5a21-4fba-8c18-d51aea085f6a.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Storage Box
Instruction
Storagebox
.xcs
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
5495
54881
Instruction
1
Step1: Import the design into XCS
Preview
Preview
Start by importing the design file into XCS software. The file consists of 2 canvases.
Place the basswood correctly, adjust the settings as needed, and click process to frame the cutting range. Once finished, proceed to the cutting process.
2
Step2: Cut all the components
Preview
Preview
Now it's time to cut all the components needed for the jewelry box.
3
Step3: Assemble the box body
Preview
Preview
Next, follow the picture to assemble the box body.
4
Step4: Assemble the cover of the jewelry box
Preview
Preview
Assemble the top cover of the jewelry box as shown in the picture
5
Step5: Assemble the decorative parts
Preview
Preview
Preview
Preview
Put together all the decorative parts of the jewelry box.
6
Step6: Put all sides together to complete your work
Preview
Finally, assemble the box cover and body together. Congratulations! Your work is complete.
7
Step7: Final look
Preview
After the assembly is completed, it is best to use woodworking glue to strengthen the joints
Comments
