HomeTemplatesDecorHome DecorShelves & Holders
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Halloween Light Box with Death

Instruction
WindowsHalloweenLantern2.xcs
WindowsHalloweenLantern2
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
184
1665
Information
      Infuse your Halloween decor with an element of foreboding mystery using this laser-cut Grim Reaper lantern. The menacing silhouette of Death, complete with a scythe, adds an ominous presence to any space. Place it around your home or hang it on your wall to welcome guests into your own little house of horrors.

Key Features:
3-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Material width required for this project is 3mm.
Perfect for both beginners and experienced makers.

Download this design and start creating spooky Halloween Candle Holder!
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

 

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview

After cutting you have several elements.

Now you should collect all the elements in the order as shown in the video.

The video shows the assembly of a similar design.

3
Step3: Done
Preview

Now you can decorate your home with this Halloween Light Box!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-ND