HomeTemplatesDecorSeasonal & Themes DecorThemed Decor
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Halloween Monster

Instruction
Monster5.xcs
Monster5
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
85
1199
Information
      Meet this charming little monster—a perfect Halloween decoration to add a touch of cuteness to your spooky setup! With its sweet smile and playful details, this laser-cut piece is a delightful way to celebrate the season. Hang it on your wall, place it on a shelf, or use it as a standalone ornament—this decoration is sure to bring smiles and festive cheer to your home!

Key Features:
5-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.

Download this design and start creating your own cute monster!
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

RED LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the red layer (this layer contains the path for engraving).
  3. Set the processing type of the red layer to Engrave. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 60) 
  6. Set Speed (S1-20w: 180) 
  7. Set Number of Passes (S1-20w: 1)
  8. Line per cm (S1-20w: 120)

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview

After cutting you have several elements.

You should glue all the elements of this decorative together.

3
Step3: Done
Preview

Now you can decorate your home with cute monster decoration!

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-ND