Report
![[Laser cut and engrave] Boo! Shelf sitter](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/7c41e085-52f4-4966-95ea-a3d6e34cdb19?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Boo! Shelf sitter
InstructionBooStandUp
.xcs
Application scenario
Laser processing (90min)
Machine & module
xTool M1
10WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
41
411
Instruction
1
Step1: Design
Preview
- Create the text “B” “O” “O” individually
- Choose some Halloween themed graphics from the basic shapes tool bar and they are under festival
- size them how you wish
- add some tabs for the base
2
Step2: Laser
Preview
- Make sure all your objects are set to cut
- grab your material and make sure all your settings are correct
- auto measure
3
Step3: Creating the base
Preview
- Create a rectangle that will be the base for your project
- grab some digital calipers and measure the tabs for each letter and right them down
- measure the length and width
- create three different rectangles with each dimension for the tabs to fit into
- Make sure all the objects are set to cut and send to the laser
- Once I cut out the base I realized my tabs are too long so I had to cut another identical base
4
Step4: Paint & Assembly
Preview
Preview
- Paint your pieces
- Glue your graphic cut outs on the the letters
- glue your two bases together
Comments
