Report

Acrylic Family Name

Instruction

gibsons

.xcs

Application scenario

Laser processing (25min)

Machine & module

xTool S1

20W

Material used

3mm acrylic

Glue (E7000)

paint

Stain

1183

Information

      Here is a gift for a family made from 19mm stain pine and black cast acrylic painted white. This sign is 10" x 23.5" all done without conveyor.

Preview

This project uses 2 sheets of 12x12 acrylic, these sheets are set to be cut one by one
With the software the 2 sheets are set to be the right size fonts laid out across both sheets
With the first letters fitting on the sheet the second sheet gets the remaining letters
This is also set to align with the top of the 19mm thick pine board
This way when both acrylic sheets are cut they are lined up along the top on the pine to center and space out the letters properly.

Preview

Once the letters have been cut with the laser the 2 sheets are taped in place
The letters are painted white and once dry they can be glued in place from the cut outs.
When glued the 2 sheets are lifted away and you have a perfectly aligned sign and ready to use.

Comments