Report
![[Laser cut and engrave] Red and beige decorative letter J wooden signs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f58eeac8-2792-4a0c-ab8b-8365d6034c86?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Red and beige decorative letter J wooden signs](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Red and beige decorative letter J wooden signs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/f58eeac8-2792-4a0c-ab8b-8365d6034c86?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Red and beige decorative letter J wooden signs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/d47c6b84-19c9-4739-84c1-77a6042cd0e3.jpeg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Name plaque acrylic & Basewood
Instruction
Nameplate
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
20WCompatibles · 13
Material used
1/8"(3mm) Dark Red Acrylic
15
513
Information
Door sign for my sons room, he wanted his own name in his door. I Used his name and then an outline around it to create the base wood template
Instruction
1
Step1
Started with creating the templates by selecting my font and typing my sons name, i checked in with him to make sure he liked it(this was the longest part of the process) Once done i selected outline, i made the outline larger until it felt like the right fit for a base plate. I then hid the smaller file and cut on basewood for the sign base. Once completed i did the same for the smaller name cut file, i cut using red acyrilc. Once both were cut i used super glue to add the letters to the base.
Comments
