Report

[Laser cut and engrave] Retro Gold Acrylic Cassette Tape Keyring Keychain — Project made with xTool F1 machine for Laser cut and engrave.

Retro Gold Acrylic Cassette Tape Keyring Keychain

Instruction

tape keyring

.xcs

Application scenario

Laser (4min)

Machine & module

xTool F1

Material used

3mm Black Acrylic (for Slide Extension)

247

3019

Information

      With this project you will learn how to cut & engrave gold acrylic with your xTool and make a very cute retro keyring keychain.

Instruction

Step1: What you will need

For this project you will need gold acrylic 3mm wide or any other acrylic colour you will like to choose as well as a keychain keyring.

Step2: Instructions

Just place your acrylic on your laser bed. I would recommend to lift your acrylic with little magnets or 4 pieces of acrylic so that the laser beam can breath and the acrylic does not get stuck to the laser bed. It is also very important to focus the laser properly to avoid any flames or burnt marks.

Cut your acrylic with these settings: Power: 100% Speed: 3 I recommend 2 to four passes.

Step3: Enjoy!

Preview

Now that this piece is cut & engraved, you can assemble it and voila! you have a very nice keyring keychain which you can personalise anytime. Maybe add a name or special message?

Comments