30 0z MJ Tumbler

Everything is set and ready to go for a 30oz tumbler! You should already know how to use the rotary function and how to place graphics.

I have placed guides in the file that should be turned OFF (output) and for visual guidance only, but you should not need to change it. Always make sure BOTH layers are selected if you move anything. They need to stay aligned. If you move the graphics, take the guides WITH you.

The red layers are cleaning passes, done AFTER the main engraving on the blue layer. This is whay clears out any dull coating left behind. 

The layers are already stacked and placed so the work can be done in one process (the engrave PLUS cleaning pass), per top and bottom of the cup. That means the cup will do both sides in one process but the top (canvas 1) will be processed separately than canvas 2 still (2 processings total).

It is important to keep them aligned.

The upper body of the cup has a 12.25 in perimeter

The stem has 9.875 in perimeter

If your cup's dimensions are not these you will unfortunately have to do your own placement and framing.

After final processing, wipe your cup with Mr. Clean magic eraser and alcohol. All residue will clear and your tumbler will be nice and shiny where engraved.