Report

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré — Project made with xTool P2S machine for Laser cut and engrave.

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

[Laser cut and engrave] Nichoir en bois découpé au laser avec oiseau coloré

Laser cut wooden birdhouse with colorful bird

Instruction

mangeoire1.xcs

mangeoire1

.xcs

Application scenario

Laser processing (90min)

Machine & module

xTool P2S

55W

Material used

3 mm plywood

gift

51

1377

Information

      Here is a small nesting box for small birds such as chickadees, with a touch of humor.

pethousecontest

Instruction

1

Step1: Laser cutting

https://x.com/Delirium07x

https://www.facebook.com/permalink.php?story_fbid=pfbid0eMuvxRoJvkPKDTWMrfxwt2dRNfepfmbFFCywQ3FR8AGvadxQqUYQoBngNfdXp9dYl&id=100081820203908

The file consists of 4 canvases.

The 2nd and 3rd canvas allow you to add texture

and the 4th canvas to add a perch

1 cut out the parts of the nesting box

and then fit them together.

If you want a birdhouse with imitation tiles and boards, go to step two but don't box the different pieces

2

Step2

On the 2nd canvas you have textures for the roof and the wall

to engrave the tiles on the roof, arrange your roof on your laser and with the help of the camera lay the textures on your roof. Then engrave

for the side walls do the same on

the 3rd canvas you have the texture for the front and back walls.

Lay your walls on the machine and apply the texture to your walls

with the help of the camera

3

Step3

The 4th canvas allows you to add a perch for the chickadee to land on

Comments

Remixes

License

You may also like