BBq table

Please check the engraving on the material you want to use. All materials are different and the settings on the engrave can't always be relied on if you want a perfect finish. 

To start, take the table top off the stand. For my choice of table this was easy, there were four screws on the bottom and the table top fitted well into the machine. Ensure you use the raiser or remove the slats if needed.

Once in the machine place the design over the table top. When happy with the placement press process.

Once the table has finished engraving remove and wipe down to ensure it is clean. If needed you could oil the top. As this was a shop bought table it already had something on it so I just make sure that the table is wiped down after use and kept indoors when not in use. 

Enjoy the table and don't forget the beer!