Report
![[Laser cut and engrave] Laser-Cut Layered Christmas Gnome Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/de468d3a-3a62-4a60-98e5-64778de98de0.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser-Cut Layered Christmas Gnome Decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Laser-Cut Layered Christmas Gnome Decoration
InstructionMoj Gnom
.svg
Application scenario
Laser processing (150min)
Machine & module
Longer Ray5
10WMaterial used
3 mm plywood, light birch, size about 400 × 400 mm
12
Information
Layered gnome, laser-cut and engraved in plywood, on a base with the inscription “Wesołych Świąt” (Merry Christmas) or “Pogody Ducha” (Good Spirits). Hand-assembled and carefully finished, it creates a warm, cozy atmosphere – especially when paired with a safe LED tealight that lights up the engraving. A perfect Christmas project for decorating a table, sideboard or windowsill.
Instruction
1
Step1
- Place 3 mm plywood on the Longer Ray5 10W work area.
- Cut and engrave all parts of the gnome and the base according to the file.
- Lightly sand the edges if needed to remove small burns.
- Glue the gnome layers together to create the 3D effect.
- Glue the finished gnome onto the rectangular base with the text.
- Let the glue dry completely.
- Place the LED tealight in front of the gnome on the base – ready to decorate your table or shelf.
Comments
