Report
![[Laser cut and engrave] Laser Cut Naughty But Nice-ish Angel Christmas Ornament with 2 versions, Multilayer or single](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/68e9e555-5239-4426-9802-2ffff1256d1d.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Naughty But Nice-ish Angel Christmas Ornament with 2 versions, Multilayer or single](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Laser Cut Naughty But Nice-ish Angel Christmas Ornament with 2 versions, Multilayer or single
Instructionnaughty nice
.xcs
Application scenario
Laser processing
Machine & module
xTool P2S
55WCompatibles · 12
Material used
3mm mdf
1/4"(6mm) Basswood Plywood
1
25
Information
This little guy can be created as a single layer design or multi-layered design. Use the canvas on the left bottom corner to select which version you would like. Can be left as a natural wood look or painted as well
Instruction
1
Step1
Preview
Preview
Preview
Preview
Prep your material and chose which version you want to create.
There is 3 separate canvas to chose from on left side via menu.
- Engrave or single layer version is the first canvas.
- 2 layer 3d version is canvas is the second one
- has all versions including a separated pieces angel that is for easy painting
2
Step2
Once you have chosen your version you can engrave, cut and sand with 220 sandpaper to remover any char. From there paint with acrylic paint markers or your chosen method. You can also just engrave the lines and leave a natural wood look.
Comments
