Report
![[Laser cut and engrave] Laser Cut Wooden Santa Claus Christmas Ornament Decoration](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/20a0a916-9ead-4305-a66f-2d0d9f9c77b5.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
3d Santa Face Bauble - Scored - Ready for painting
Instruction
3d Santa Face bauble - Score
.xcs
Application scenario
Laser processing (4min)
Machine & module
xTool S1
40WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
7
Information
A Gorgeous 3d Santa Face Bauble.
Once you create this, each piece will align perfectly with the design for a seamless appearance.
After looking around, I could not find a laser Cut/engraved Santa Face Bauble that I liked at all, so I decided to create one.
Here we have a gorgeous 3d Santa Face Bauble that is super simple to put together
I have made the File to allow for each side to be flipped (Please read the instructions on the File)
It really is so simple to put together once you have scored and cut out.
I have scored this version as it allows for some personal creativity with children, they can easily colour or paint the design.
I personally would recommend Painting or coloring the design before assembly.
** IF YOU RESIZE, YOU WILL NEED TO REDO THE SLOTS AND TABS AS THAT WILL AFFECT THE FINAL FITMENT!!**
Instruction
1
Step1: After First process, Flip Part A, Part B into Cutout of C and Part C into Cutout of B
The video is to help - Just flip Part A and then Flip Part B and place into Cutout of Part C - Now flip Part C and place into the Cutout of Part B.
You can now run the process of Scoring again - Make sure you turn off the Output for Cutting as you will not need to run that again!!
2
Step2: Santa 3d Face Bauble Pieces
Preview
3
Step3: Push Piece into the slot and align - You can glue if you are happy.
Preview
4
Step4: Push final piece into the slot and align - You can glue if you are happy.
Preview
5
Step5: You should now have the finished item 😁
A unique 3d Santa Face Bauble
The design has been scored to allow for coloring or painting the design.
Once the scoring and cutting out is finished, the design is super simple to assemble.
I would recommend painting or coloring before assembly - It will just be easier.
Comments
