Report
![[Laser cut and engrave] personalized Christmas Wine Glass with Holiday Tree and Sante Clause Design / personalisiertes Weinglas mit Weihnachtsbaum und Weihnachtsmann](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/63d689ec-3456-4307-a73b-1963afb83d28.jpeg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] personalized Christmas Wine Glass with Holiday Tree and Sante Clause Design / personalisiertes Weinglas mit Weihnachtsbaum und Weihnachtsmann](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
personalized Christmas Wine Glass with Holiday Tree and Sante Clause Design / personalisiertes Weinglas mit Weihnachtsbaum und Weihnachtsmann
InstructionTannenbaumglas
.xcs
Application scenario
Laser processing (50min)
Machine & module
xTool P3
5W, 80WCompatibles · 8
Material used
Clear Soda-Lime Glass
7
Information
I tried engraving a Wine Glass with different motives in score and engrave
Instruction
1
Step1: using RA3
Prepare the RA3 with the clamping jaws and insert the glass with the opening facing the RA3.
2
Step2: prepare the glass or not
you need to decision if the glass should be prepared with e.g. color spray or not.
For me and the P3 laser it works fine whitout.
3
Step3: engrave
select the different motives and set it to engrave, if its not done until now.
start….
4
Step4: clean
after engraving you could clean the glass
Comments
