Report

[Laser cut and engrave] Cover notebook — Project made with M1 machine for Laser cut and engrave.

Cover notebook

Instruction

Files

Original files

AuthorM1 · 3 mm plywood

Add Make Profile

Same design, different machine, material, or any improvement · Earn 100 Credits

1329

12109

Information

      I've made a new wooden cover for my notebook. 

This project was inspired by Xtool Spain & Sandra from @pasitoapasitodecorando (instagram).

Book cover

notebook

cover

Instruction

Step1: Design

Preview

First determine the dimensions of your book cover* and then choose a rectangle with the same dimensions under 'shapes'. Then place the harmonica mechanism from my file in the center of the rectangle. Check whether it has the correct width. Adjust this if necessary by removing dashes or adding extra dashes (copy/paste). Then add the desired images and text to your design. I chose a floral pattern from XCS shapes/patterns.

Step2: Laser

Preview

Choose your desired wood and place it in the laser. I used my honeycomb and magnets for this.
I used 3mm plywood from the hardware store*. Choose the settings that best suit your wood. You can test this in advance with a test grid. I chose to score the floral pattern, engrave the text and cut the rest. See the pictures for the settings I used.

*https://www.gamma.nl/assortiment/multiplex-timmerplaat-3-mm-122x61-cm/p/B818520?store=%7Bstore_code%7D&gad_source=1&gclid=Cj0KCQjwztOwBhD7ARIsAPDKnkA13iBlYHpNzTaK1aoaxv6d2arpfLhsSZOSW6aIToBTIPWMKfkr4V4aAjXCEALw_wcB&gclsrc=aw.ds

Step3: Assemble

Preview

When your cover is ready, you can treat it with a varnish (spray) to keep the cover nice and neat. After it’s dry you can go on with assemble.

Remove the original cover from te notebook (optional). Then you can stick the cover to your (note)book. Use double-sided tape, from Tesa or for example. If desired, you can place a cotter pin on the front and an elastic band on the back, so that you can close your book.

Check the pictures for the end result, or watch my video on www.instagram.com/itblommefamke or www.facebook.com/itblommefamke

* I used a black notebook from a Dutch store called HEMA, price €5,-, for this project.

Comments