Report
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Ornament with Santa and Reindeer](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/029bfb9b-0d95-479a-9cb1-92e2d442fccb.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Christmas Tree Ornament with Santa and Reindeer](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Layered Santa Christmas Tree Pendant
2025 Christmas Contest
Instructionchristmas_ornament_layered_2
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool S1
20WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
14
180
Information
Christmas tree ornament in multiple layers. It features Santa Clause on his sled with a reindeer.
If you are tired of simple 2D flat engraved ornaments, this one is perfect for you. Easy to make and a fun project.
Instruction
1
Step1: Cut the parts
Preview
Cut out all of the parts. You can paint them at this stage or later on.
2
Step2: Add the plate
Preview
Add the oval plate to the tree.
3
Step3: Add the house and Santa
Preview
Preview
Start by adding the house first. Next, carefully glue in the Santa. Ba careful as this part is delicate and may break easily.
If any of the parts require too much force, lightly sand the opening.
4
Step4: Paint
Preview
Preview
Paint the design. You can also paint immediately after cutting as it will be easier to reach overlapping surfaces.
5
Step5: Add a string
Preview
Add a piece of string and hang it on your Christmas tree.
Comments
