Report
![[Laser cut and engrave] Laser Cut Wooden Christmas Eve Ornament with Santa and Reindeer](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/2c6db75b-59dc-4e9d-9e73-900b347db6ca.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Laser Cut Wooden Christmas Eve Ornament with Santa and Reindeer](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Christmas Ornament
InstructionChristmas Ornament Christmas Eve
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool F1
2W, 10W
xTool F1 Ultra
20W
xTool F2
2W, 10W, 20W
xTool F2 Ultra
40WCompatibles · 9
Material used
1/8"(3mm) Basswood Plywood
4
25
Instruction
1
Step1
How to Create a Christmas Ornament Using the xTool Laser Machine
1. Cutting and Engraving
Cut and engrave all the ornament pieces using the xTool F1 on a sheet of 3 mm basswood. Make sure to use the correct settings for clean cuts and detailed engraving.
2. Painting the Pieces
After cutting, paint the background piece and the Santa Claus piece separately. Allow the paint to dry completely before assembling.
3. Assembly
Once all the painted parts are dry, glue the layers together carefully to form the final ornament. Make sure each piece is aligned correctly before the glue sets.
4. Final Touches
If desired, add ribbon, string, or any decorative detail to hang the ornament on the Christmas tree.
Comments
