Report

[Laser cut and engrave] Easter banner — Project made with xTool D1 Pro machine for Laser cut and engrave.

[Laser cut and engrave] Easter banner — Project made with xTool D1 Pro machine for Laser cut and engrave.

[Laser cut and engrave] Easter banner

[Laser cut and engrave] Easter banner

Easter banner

Instruction

easterbanner.xcs

easterbanner

.xcs

Application scenario

Laser (10min)

Machine & module

xTool D1 Pro

10W

Compatible xTool Machine

M2

10W, 20W

F2 Ultra UV

5W

F2

15W

P3

80W

F2 Ultra

40W

F1 Ultra

20W

M1

5W, 10W

D1

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

P2

55W

F1

10W

S1

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

Chartreuse Stainless Steel Tumbler with Handle (24oz)

3mm Basswood Plywood

gift

36

1610

Information

      I did these two mini banners to hang on the front door knob during these holidays.

Instruction

1

Step1: Design

Easter banner instruction: step 1 - Design

Preview

Easter banner instruction: step 1 - Design

Preview

First I did the shapes of the banners, they are small because I didn´t want them too big for my purpose. They measure 10x12 cm more or less but if you want them bigger you just have to modify their size until you get the desire one.

Second, I added the other shapes, the egg and the rabbit. Then, I added the sentence I wanted to engrave. I used 90% of the laser power to engrave since I am going to paint over it later. In my case I used “Happy Easter” on both shapes but there are endless possibilities. I also wanted to cut some heart shapes into the egg shape so I added them too.

2

Step2: Cut and engrave

Once the design is finished, it is time for the xtool to work.

3

Step3: Decorate

Now it is time for you to enjoy using your creativity to decorate them as you like.

Have fun!

Comments

Remixes

License

You may also like

easter celebration

easter stationery