Laser Cut Decorative Candle Holder with German Text and Stars

Connect your rotary attachment to the xTool F1 and position it according to the official setup guide.
Make sure the rotary axis is stable and centered before you start.

⚠️ Important safety note:
When using the rotary, the laser operates as a Class 4 laser.
Always wear appropriate laser safety goggles, and make sure everyone nearby is either also protected or outside the laser’s line of sight (e.g., behind a closed door).

🔥 Additional safety warning:
Because paper is highly flammable, always stay with the laser while it’s running — never leave it unattended.
Keep something nearby to extinguish a small fire quickly if necessary (like a damp cloth or a small spray bottle of water).
Safety first — creativity second.

Download the design and open it in XCS (xTool Creative Space).

Insert an empty toilet paper roll onto the rotary.
In the preview window, align the design to fit the roll’s width and height.
Tip: If the roll isn’t perfectly round, gently reshape it with your fingers before placing it.

Run a frame preview to verify the correct position and alignment of the design.
Double-check that the rotary axis spins smoothly and the laser head stays clear of the edges.

Before you hit “Start,” confirm again:
✅ Safety glasses on.
✅ Everyone nearby is safe.
✅ The rotary axis is clear and aligned.

Then let the laser work its magic! 🍃

🔥 Additional safety warning:
Because paper is highly flammable, always stay with the laser while it’s running — never leave it unattended.
Keep something nearby to extinguish a small fire quickly if necessary (like a damp cloth or a small spray bottle of water).
Safety first — creativity second.