Report
![[Laser cut and engrave] PU Leather Pencilcase Personalized](https://storage-us.atomm.com/resource/xart/result/190761/7ec0b4c6-a604-454e-955b-97dfa0df41e8.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] PU Leather Pencilcase Personalized](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
PU Leather Pencilcase Personalized
InstructionPencilcase
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool M1
10WCompatibles · 13
Material used
White PU Leather
31
199
Instruction
1
Step1: Cut the Leather parts
Preview
Choose the coolest leather (or PU) you have an put it in the M1.
2
Step2: Cut the Heat Transfer Vynil and apply it
Preview
Cut the heat transfer vyinil, be careful with the lase because is very sensitive.
Do some test with different speed and power.
My suggestion is to increase the power with high speed and then if needed use less speed.
Once cutted you should wait a couple of minutes and then you can apply it to the label.
3
Step3: Sew or Paste the pencilcase
Preview
Sew or paste the parts.
To sew the zip, you must fold the edge of the rectangle by 10mm and you should do this for both sides(is already calculated in the dimension of the rectangle.
4
Step4: Sew or Paste the label on the pencilcase
Comments
