Kinetic Coasters SET 5 - Hand Spinner - Fidget Spinner - Laser Cut Files

Information

      Kinetic Coasters - Set 5 - Designed by Ross McSweeney
To see a longer video of it in action! https://youtu.be/iOl_yOyB6Jw
★★READ BEFORE PURCHASING★★ 

This is a digital file. You will not receive a physical product or physical files of any sort in the mail. It will be available for instant download. The files are Zipped which will need to be unzipped on a desktop computer. 

You will need 4 sheets of cutting material and will need to be able to cut about 22cmx22cm to fit all the parts of 1 coaster on a sheet of wood/acrylic etc.
1 coaster usually takes me about 15 minutes to cut and assemble. 

There is also a tiny test cut file for each thickness. Please cut this first to make sure everything will work perfectly! It is small and quick to make.

●In the Zip folder you will find a lot of files.
★Regular SVG files. They may look like HTML files but are actually SVG files which can be read by most laser cutters and software. ★Lightburn Files (lbrn2) ★CorelDraw files (cdr) - I saved these files as a 2017 version of the software which should stop any crazy wavy lines appearing. If you need newer files let me know! ★I also have Adobe Illustrator files but they were too big for the Etsy download limit so please email me to get them.

There are 4 thicknesses to choose from. I made the most common sizes which are
★2.5mm thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★3mm thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★3.175mm (1/8th inch) thickness of wood.
 You will need to be able to cut 22cm x 22cm on your laser cutter.
★4mm thickness of wood.
 You will need to be able to cut 27cm x 27cm on your laser cutter.

The finished coasters will be 10cm x 10cm - (The 4mm coaster will be 12.5cm) 
If you cannot cut 22cm x 22cm on your laser cutter I can make you a custom file that will work for you so please send me a message after purchasing! 

★I have also included some Acrylic tops. You can either just glue a piece of acrylic on top or I have made some special pieces to hold the acrylic top on using the wooden pegs.

Feel free to email me anytime if you need help! My email is [email protected]

Please give me at least 12 hours to make up for our various time differences!

Good luck and all the best
Ross