![[Laser cut and engrave] He is Risen Wall Art with Matthew 28:6 Wooden Decoration](https://storage-us.atomm.com/resource/xart/result/218859/659fd8af-5314-43bf-9d98-dd3a93bacdfe.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] He is Risen Wall Art with Matthew 28:6 Wooden Decoration](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
He is Risen! - Wall Art- Sign
Instruction
Information
He is Risen! - Wall Art- Sign
"He is not here; for He is risen, as He said. Come, see the place where the Lord lay."
Instruction
Step1
This file uses 2 sheets of 12x12 3mm- Load the material on the honeycomb insert.
Step2
Measure your material and mark your working area- using the rectangle option. Load the file and run the project with the semi circle - The stone with scripture and the 2 small hill pieces.
Step3
After running these pieces set them aside and enter another 12x12- 3mm sheet and run the additional largest hill and the “He is Risen” text. Make sure to collect all small pieces from the font after this step is complete.
Step4
Stain or paint as desired…
I used stain on all the pieces except the font to give this a more natural look. Picuted above are the stains I used.
Back piece- Worn Navy- Varathane
Largest Hill - Dark Walnut - Rustolem
Next Largest Hill- Slate Minwax
Smallest Hill - Ebony Minwax
Stone- Slate Minwax
Step5
Glue the pieces in order from largest to smallest.
