Named Christmas Puzzle

Remix

Instruction

Name puzzle with hearts

.xcs

Application scenario

Laser (90min)

Machine & module

xTool M1

10W

Material used

1/8"(3mm) Basswood Plywood

Red Spray Paint

3mm Basswood Plywood

2382

Information

      My son requested a red puzzle from Santa this year. His favorite color is red and he loves hearts, so this was our solution. 
The engravings are deep with a speed of 50 and power level of 70. 
The cuts were the default M1 3mm basswood cut settings. 
This was a combination of my design and a puzzle file from Mr. Richard found here: https://projects.xtool.com/howtos/1737
Credit to Mr. Richard's profile: https://projects.xtool.com/profile/6309

Mr. Richard, you do great work sir. Thank you for sharing and inspiring us all.

ChristmasCreations

This remix is based on

The original work has been deleted or is no longer accessible.

Instruction

Step1: Spray paint the wood and let dry

Spray paint the wood and let dry

Step2: Place wood in the M1 and align the project on the board

Place wood in the M1 and align the project on the board

Step3: Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.

Cut. I used the Air assist on full power for the hearts and "L", and forgot to turn it on for the "ucas" so you can see the difference in color.

Step4: Glue the border and backing together and assemble the puzzle.

My son requested a red puzzle from Santa this year. His favorite color is red and he loves hearts, so this was our solution.
The engravings are deep with a speed of 50 and power level of 70.
The cuts were the default M1 3mm basswood cut settings.
This was a combination of my design and a puzzle file from Mr. Richard found here: https://projects.xtool.com/howtos/1737
Credit to Mr. Richard's profile: https://projects.xtool.com/profile/6309

Mr. Richard, you do great work sir. Thank you for sharing and inspiring us all.

Comments