Pirate treasure chest

This project consists of 3 canvas. 

First cut out the Treasure chest

 Then cut out  the Pirate with stand. 

And finally the gold pieces.

Assemble the treasure chest. It is designed to be snuck fit. You can use a hammer to click the pieces together. Glue is not necessary.

1. Start at the bottom. Click the front (with engraving) into the bottom. Then click the side in, and the other side. Finally the back.
2. Start with one side of the lid. Click the front shelf in. Then click the other side into the shelf.
3. Then click the second plank into the sides. Press firmly on the previous plank. This also applies to the following planks. 
4. When the lid is ready, place the lid on the box and ensure that the back of the lid falls into the holes in the box. Then press the rounds with slots into the holes.

Assemble the Pirate. Glue the baseplate on the bottemplate, the holes must be free. Then place the pirate into the slots of the baseplate.