Mini garden for every home

Files for cutting eggshells are not included. 

• Setting for cutting eggshells: S1 40W - power 50%, speed 15mm/s
• Setting for engraving eggshells: S1 40W - power 30%, speed 200mm/s

Please make sure the pieces fit before cutting everything. They should fit a little tightly to avoid the need for glue.

If you want to cut materials thicker than 3mm, further adjustments are necessary. To do this, please follow the instructions.

This design was created with the xTool Creative Space.
 

Image 1:

Adjust the points of the recess. It should be 0.4 - 0.6mm  smaller than the material thickness.

Image 2:

Connect the points.

Image 3:

Don't forget the other parts. 

Image 4:

Arrange the recess in a circle and cut away unnecessary lines. More on this in the next step.

Image5:

Settings. 

Image 1:

Mark and assemble parts.

Image 2:

Place a point next to the circle and cut away the excess lines.

Image 3:

Connect the points. Afterwards it should look like this.

Image 4:

Select the vertex of the circle and use the other handle points to set the radii. No corners or edges should remain visible.

Repeat these steps several times until all lengths are together. In total there should be 9 different lengths and 18 pieces. Every part is double.

And don't forget, works of art are created here.