Report
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/60c4a496-e0d6-48a7-8182-4c3f03246a53?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/60c4a496-e0d6-48a7-8182-4c3f03246a53?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Easter deco Happy Easter wooden bunny and egg decoration](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/46953e76-ce8e-44de-b4c6-c043133e0a0b.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Easter deco with base
Instruction
bunnyegg
.xcs
Application scenario
Laser processing
Machine & module
xTool M1
10WCompatibles · 13
Material used
1/8"(3mm) Basswood Plywood
257
1252
Instruction
1
Step1: XCS
Preview
red is cut
black is engrave
i made the cut-out part of the base with a kerf of -0.15
this can vary from device to device
2
Step2: assemble
Preview
you can put everything together and it holds
if the kerf did not fit you can also glue it
the back onto the front and then both onto the base
Comments
