Connect 4 Game

1. Cut out the holder pieces
2. Glue and install the dividers on one side of the main piece
3. Glue and install the other side of the main piece
4. Install the side pieces last

1. Cut and build the enclosure (red layer)
2. Cut out the internal supports (blue layer)
3. Glue the internal supports to the inside of the enclosure in the designated areas (marked out by the purple layer)

Steps 1 & 2 Optional if using different coloured wood or painting the chips in different colours afterwards

1. Cut out the rectangular outlines surrounding the chips
2. Use the corners to line up with crosshair and engrave the X's & O's on both sides of the plywood
3. Cut out the chips once engraving done on both sides