Wooden Keychains Rugby ball with name

Instruction
KeyChainrugby.xcs
KeyChainrugby
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10W
Compatible xTool Machine
P3
F2
F2 Ultra UV
F2 Ultra(Single)
F2 Ultra
F1 Ultra
F1
F1 Lite
S1
P2S
P2
M1 Ultra
D1 Pro 2.0
D1 Pro
D1
Laserbox
M2
Material used
1/8"(3mm) Basswood Plywood
gift
120
1768

Information

      Wooden Keychains Rugby ball with name. Made with 3mm bassewood plywood in Xtool M1
    

Instruction

1

Step1: Design

Wooden Keychains Rugby ball with name instruction: step 1 - Design
Preview

Open the KeyChainrugby.xcs file in Xtool Creative and you will have the Keychain

 

2

Step2: Cutting Setting

Wooden Keychains Rugby ball with name instruction: step 2 - Cutting Setting
Preview

The file is set for 3mm Basswood Plywood with Triangular Prism.

The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic or any other material you have available

3

Step3: Engraving settings

Wooden Keychains Rugby ball with name instruction: step 3 - Engraving settings
Preview
Wooden Keychains Rugby ball with name instruction: step 3 - Engraving settings
Preview

Add the name you want to have in the Keychain. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.

4

Step4: Place Stainless Steel Keyring

Add the Stainless Steel Keyring to the wood to finish the Keychain

Comments

Remixes