Report
![[Laser cut and engrave] Elegant black acrylic angel earring.](https://storage-us.atomm.com/resource/xart/result/107450/b8c24638-be40-4e48-81b7-ae007f08defc.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Elegant black acrylic angel earring.](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Elegant black acrylic angel earring.
InstructionAngelEaring
.xcs
Show 1 more
Application scenario
Laser processing
Machine & module
xTool D1 Pro
20WAccessories
xTool D1 Pro/D1 Air Assist Set
xTool Honeycomb Working Panel Set for D1 Pro/D1
Material used
3mm black acrylic
389
1616
Instruction
1
Step1: Setup
Preview
Open xcs software and import xcs or svg file. Check the setting to make sure that they work with you laser machine. I like to do a faster cut on acrylic and two passes with air assist for a cleaner cut that is not melted. Size can be changed to bigger of smaller. Lay acrylic on honeycomb and adjust laser accordingly.
2
Step2: Cutting
Cut the file. I like to keep the backing paper on till after cutting. Pull of backing paper and fasten the earing ring of your choice.
Comments
