Report
![[Laser cut and engrave] Handcrafted wooden coasters with intricate bird designs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5911188a-b3e9-4d60-98bc-1c0672913aa4?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Handcrafted wooden coasters with intricate bird designs](data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAAoAAAAKCAYAAACNMs+9AAAAAXNSR0IArs4c6QAAABdJREFUKFNjZCASMBKpjmFUId6QIjp4AAppAAuXjCs4AAAAAElFTkSuQmCC)
![[Laser cut and engrave] Handcrafted wooden coasters with intricate bird designs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/5911188a-b3e9-4d60-98bc-1c0672913aa4?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Handcrafted wooden coasters with intricate bird designs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/701a7f2a-1750-4f15-9d7a-e66d3b9ee34e.jpg?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Handcrafted wooden coasters with intricate bird designs](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/0d49e63d-36dc-492f-9f60-df17cedb076f?x-oss-process=image/resize,w_200,h_150,limit_0/interlace,1/format,webp/auto-orient,1)
Beautiful, intricate bird shadow boxes
Instruction
Birdshadowboxes
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatible xTool Machine
M2
10W, 20WF2 Ultra UV
5WF1 Ultra
20WM1
5W, 10WD1
5W, 10W, 20WD1 Pro
5W, 10W, 20W, 40WP2
55WF1
10WS1
10W, 20WM1 Ultra
10W, 20WP2S
55WMaterial used
1/8"(3mm) Pine Ponderosa Plywood
232
1990
Information
Really fun, and beautify bird shadow boxes. Combining bird cutouts with engraved bird images.
Instruction
1
Step1
Preview
You will likely need to do three runs. One to do the cut outs of the birds, the other engraved and the last the frame for the box. Process the three canvases.
2
Step2
Preview
Place glue at the joints for the frame. Once the frame is glued, add a thin layer of glue around the outside of the engraved piece. Place the frame on engraved piece. Place thin glue on the bottom of the cutout piece and place on top of the frame. Remove excess glue and let dry.
These pieces can stand on their own if you want them on a counter.
Comments
