Report
![[Laser cut and engrave] XCS image acquisition sticker holders for honeycomb](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/faa008f1-0be8-4383-909f-1cde4ec677a5?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] XCS image acquisition sticker holders for honeycomb](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
XCS image acquisition sticker holders for honeycomb
InstructionCamerastickerholders
.xcs
Application scenario
Laser processing
Machine & module
xTool S1
40WCompatibles · 12
Material used
1/8"(3mm) Basswood Plywood
24
512
Instruction
1
Step1
I would first refer you to the following xtool link and follow the instructions for placement within the machine:
https://support.xtool.com/article/1299
After you have printed your markers from the link above then cut this project from 3mm basswood and glued the pieces together. Next paint with black paint or use a black sharpie on the platform section before gluing the marker pieces to the center. (not painting the platform piece will cause the XCS camera acquisition to fail).
Comments
