Acrylic Ferris wheel

Import the XCS file into the software and confirm the dimensions, processing position, and processing mode. Note: The files in this case use transparent film paper and 3mm transparent acrylic. If the type and thickness of the material you choose are different, please adjust the laser processing parameters and the file dimensions according to the actual material. 

Place the transparent film paper into the processing area of the M1 Ultra, making sure the material is flat. Then select the combined processing mode, and use the inkjet head and fine cutting knife to process the transparent film paper in sequence. Do the layout processing according to the actual situation of the material. Note: The processing parameters marked here are the officially recommended parameters for transparent film paper. If you prefer different results, please adjust them manually. 

Place the 3mm transparent acrylic into the P2 processing area, ensuring that the material is flat. Then select the honeycomb panel processing mode and use the line cutting to process the 3mm transparent acrylic. Perform the layout processing according to the actual situation of the material. Note: The processing parameters marked here are the officially recommended parameters for 3mm transparent acrylic. If you prefer different results, please adjust them manually. 

Use acrylic glue to bond the transparent film paper and the 3mm transparent acrylic, and assemble all the acrylic parts.