customthings in person sales banner modified for laser engraving

ID 316844
Atomm Exclusive
Instruction
This project is created with Atomm AI
Files
Original files
AuthorF2 Ultra · 3/64"(1mm) TA1 Titanium Sheet
1
Preview
Preview
Preview
Preview
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
124
Source Image Generated with Atomm AI
Tap to View Prompt and Remix It!
atomm-ai-image
view prompt

Information

      I modified a Customthings in person tabletop sales banner to engrave with F2 Ultra mopa laser. the QR code works perfectly and the finished engraving on Titanium sheet was also perfect. 
    

Instruction

1

Step1: create your banner in Customthings under craft fairs

try and select a colour not in your logo as AI WILL try to remove it.

i had to select a previous version to edit with the green ‘&’ in the logo.

it was the one before it detected the green ‘&’ and removed it, this was a simple error to correct

2

Step2: use AI to remove the background

use the AI chat to remove the banner ‘colour’ as background removal does not work. i learned this after a few failed attempts 

3

Step3: crop image to make it as small as possible including the logo

select the image and the crop tool to make it as small as you can, but leave a small border.

pull the crop down from the top to crop OUT the logo (it is very ridiculously small).

adjust the QR code and instructions to make as big as possible but leave room for your logo.

4

Step4: add in your original logo file

add your logo to the job and size it to fit making sure not to overlap with the QR code.

make any necessary adjustments to the QR code and instructions to make them fit correctly.

5

Step5: check that everything is good in the preview

make any final adjustments necessary and move to the next step

6

Step6: laser engrave your banner

i set the power settings to 86% for the logo and 85% for the QR code and instructions.

i found these settings to give the best results after using the Xtool settings on a similar project for the titanium sheet.

i left all other settings as Xtool standard.

Comments

Remixes

License

This work contains AI-generated content.