Report

Squiggle Wall Art

ID 29149
Instruction
Files
Original files
AuthorS1 · 1/8"(3mm) Basswood Plywood
1
Preview
Add Make Profile
Same design, different machine, material, or any improvement · Earn 50 Credits
Tips for a great Make Profile →
gift
18
2011

Instruction

1

Step1: Cut out the wood with your laser cutter

Use whatever wood/material you would like. You can scale the images, as well, but make sure to scale them both the same.

2

Step2: Remove every other layer

The backing piece is one solid piece, but the top layer will need to have a gap between each piece you keep. You can see from my final image that I removed every other piece. If you start from the outer-most ring, it'll be much easier.

3

Step3: Optional: Paint the layers

I didn't with this particular squiggle, but I like the look of painting the rings and the back piece sometimes. I also like it without paint, so take your pick!

4

Step4: Glue the top layer to the base piece

I found it easiest to start with the outer-most ring and go inward, gluing each ring with a gap between it and the next most large ring.

Comments

Remixes