Miniature Shop Front Earring Display Stand

Miniature Jewelry Store – Assembly Instructions

1. Prepare the Materials
   Cut all design pieces from the recommended sheet material and thickness.
2. Identify the Pieces
   Separate the base, walls, front door, side panels, roof pieces, awnings, decorative parts, and jewelry display sections.
3. Assemble the Base
   Start by placing the main shop walls into the slots on the base. Make sure each piece is properly aligned before applying glue.
4. Build the Main Structure
   Attach the front and side wall sections together. Insert the tabs into their corresponding slots.
5. Install the Door & Arch
   Assemble the arched entrance and attach it to the front section of the jewelry store.
6. Attach the Roof & Awnings
   Carefully install the upper roof pieces and decorative scalloped awnings.
7. Add the Jewelry Display Parts
   Install the small display components inside the windows and attach the jewelry pieces if you are using physical jewelry for decoration.
8. Final Assembly
   Check that all joints are properly fitted and allow the glue to dry completely before moving the model.

Tips:
• Use wood glue or suitable craft adhesive.
• Assemble on a flat surface for better alignment.
• Do not force the pieces if they do not fit; check the orientation first.
• Recommended material thickness: 3 mm, unless otherwise specified. Different material thicknesses may require scaling or adjustments.

Note: This listing contains digital laser-cut files only. No physical product or jewelry is included.