Report

[Laser cut and engrave] Intricate wooden carving with Native American headdress design — Project made with xTool D1 Pro machine for Laser cut and engrave.

Intricate wooden carving with Native American headdress design

Instruction

NATIVEAMERICANCHEIF_1

.png

Application scenario

Laser processing (420min)

Machine & module

xTool D1 Pro

20W

Accessories

xTool Honeycomb Working Panel Set for D1 Pro/D1

xTool Safety goggles

Extension Kit

xTool Enclosure: foldable and smoke-proof cover for D1/D1 Pro and other laser engravers

xTool D1 Pro/D1 Extension Kit

20W Diode Laser Module for xTool D1 Pro

LightBurn Software - GCode License Key

Material used

7/16" poplar

1253

Information

      I asked AI for a picture of a Native American from the Lakota Sioux Tribe. This was the result. The Native American Culture has always fascinated me.

Instruction

Step1: Lakota Sioux Native American in full Headdress

Preview

This project was run on poplar with an XTool D1 Pro 20w. I ran the 1st pass at 8000 mm/m with 100% power and the 2nd pass at 9000 mm/m with 100% powered and used a satin polyurethane finish.

Comments