Report
![[Laser cut and engrave] Painting support wedge!](https://image-res.xtool.com/ali-res/community/making/767443f1-5864-46d9-91d7-5c108762892b/20230719_184250.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Painting support wedge!](data:image/gif;base64,R0lGODlhAQABAAAAACH5BAEKAAEALAAAAAABAAEAAAICTAEAOw==)
Painting support wedge!
Instructionpaint wedges
.dxf
Show 1 more
Application scenario
Laser (1min)
Machine & module
xTool D1
10WMaterial used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
143
1972
Information
These handy little rectangle wedges are used to support your pieces to be painted off of the work surface! Very handy and easy to use. The file supports 3mm, 6mm, 1/4", and 1/8" material!
Instruction
1
Step1: Cut the 2 pieces of the wedge
Preview
Cut out enough pairs of wedges to prop the parts to be painted!
2
Step2: Assemble the wedge
Preview
Preview
Slide the 2 pieces together to firm the assembled wedge!
3
Step3
Preview
Preview
Set the assembled wedges on the work surface in an orientation that will hold the piece to be painted!
Comments
