Report
![[Laser cut and engrave] Wooden Polaroid Photo Frame](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/19b939a7-c7de-4c4c-aabd-922770a6083b?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Wooden Polaroid Photo Frame
Instruction
Polaroidframe
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool P2
55WCompatibles · 11
Material used
1/8"(3mm) Basswood Plywood
97
1227
Information
Took a great looking Polaroid sign and have no place to display it? Come try with me to make a nice looking Polaroid frame to stick on your refrigerator!
Bill of Materials
xTool parts
Beeswax Wood Polish (2pcs)/45909
x1
* Currently only available in US store
Instruction
1
Step1: Import the XCS file
Preview
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
（3mm Basswood Board ）
processing type：laser cutting
power: 100
speed: 16
pass: 1
processing type：engrave
power: 50
speed: 250
Lines per cm：100
pass: 1
（soft magnetic sheet）
processing type：laser cutting
power: 100
speed: 16
pass: 1
2
Step2: Laser cutting
Preview
The consumables are placed one by one on the knife strip plate for laser cutting, and the finished elements are removed and prepared for assembly.
3
Step3: Photo frame assembly
Preview
Preview
Preview
You can apply a shallow layer of wood wax oil on the surface of the board, then use a strong glue to stick the board in place, and finally stick the soft magnetic sheet behind the board.
4
Step4: Finish
Preview
You can also use acrylic markers for coloring if you prefer.
Comments
