![[Laser cut and engrave] Pencil Box](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/33ee4956-633d-4772-972a-88b97a066892/cover.png)
![[Laser cut and engrave] Pencil Box](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/392e31c8-d6a5-4d17-907b-def983e2262b/IMG_20241005_103231_HDR[1].jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Pencil Box](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/119b6648-34bb-488b-965e-1d44c1ba2b6c/IMG_20241005_103059_HDR[1].jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
![[Laser cut and engrave] Pencil Box](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/1d8168b4-f5d1-4246-a925-e9745cdbd9c8/IMG_20241005_100712_HDR[1].jpg?x-oss-process=image/resize,m_fill,w_160,h_120,limit_0/interlace,1/format,webp/auto-orient,1)
Pencil Box



Instruction
Step1
I created the box using MakerCase (https://de.makercase.com/#/basicbox), then used Inkscape to join the sections to remove unnecessary cuts. I created the images with Midjourney. Use them or replace them as desired. The two panels with the images are the front/back of the box. The blank panels are the sides.
This pattern will work only with 5mm (.197in) wood. If your wood is thinner or thicker, the joints will not meet correctly.
I used 5mm Revolution Ply from Lowe's. I have them cut the sheet into five strips 19 1/8". They can then be easily cut at home into 12"x19 1/8" sections that fit nicely on the honeycomb panel. One sheet yields 20 pieces. I use these for project test and utility projects.
After cutting, assemble the box without glue to make sure all joints fit correctly. Take it back apart and apply glue to joining surfaces. I chose to use wood glue, applied with a toothpick. After the box is assembled, wrap with rubber bands to hold parts securely until glue is cured (30 minutes for the glue I used).
You could probably use super-glue, but I didn't trust myself to align the parts correctly on the first try or to manage not to glue myself to the box.
MakerCase is a great utility for designing simple boxes. Just make sure you have an accurate material thickness measurement or the joints will not line up.
Remixes
License
You may also like
Eagle Over Water - Deep Engrave

Laser Engraved Mountain and Forest Wooden Wall Art
Bald Eagle Flying Over Mountain Landscape Wall Art

River Strike – Bald Eagle Relief Block
Wooden Jigsaw with AI image week3project
Eagle coaster holder to go with the slate eagle coasters I posted earlier

AIGLE+LOUP keychain
America
Pencil box with wildlife

Blue LED Lit Eagle Landscape Laser Engraved Glass Art
Slate Coaster with a Mountains and pines design

3D Multi Layer Laser Cut Wooden Light Box with Eagle, Moose, Elk and Racoon Forest Design 3MM
Low relief wood engraving of an eagle soaring over the mountains

Desk pen holder with eagle motif and mountain landscape

Detailed Mountain Wall Art

Multi-layered wooden painting depicting a bear in a mountain landscape

Laser Engraved Mountain Landscape Wooden Wall Art



