![[Laser cut and engrave] Best Driver Ever Ribbon Shaped Car Rearview Mirror Hanging Ornament](https://image-res.atomm.com/resource/xtool/community/attachment/xtool-community/5ac6c027-36af-492b-b20e-9083375281c2.png?x-oss-process=image/resize,m_fill,w_1280,h_960,limit_0/interlace,1/format,webp/auto-orient,1)
Rosette Mirror Hanging Ornament


Information
This is a wooden hanging car charm featuring a rosette-style design with engraved text in the centre. It’s perfect as a thoughtful gift for Dad, Mum, or any loved one, and can be hung from a rear-view mirror for a personal touch inside the car.
The text in the middle can be fully customised, allowing you to create your own message or personalise it with names. A blank version is also included so you can easily add your own wording.
Instruction
Step1: Download & Open File
Download the file and open it in your chosen design or laser software.
Step2: Machine Setup
This design is set up for use on the F2 with the slide extension, allowing you to cut multiple items in one run, but it can also be used on a standard single baseplate machine.
Simply place the design onto your machine bed. If you are cutting just one item, remove any duplicates and leave a single design in place. If you are using a slide extension or a larger machine, you can duplicate the design to cut multiple pieces at once or create variations with different text.
Step3: Choose Your Size
You can use the design at its current size or resize it to suit your machine. If resizing, ensure the proportions are adjusted evenly so the design remains aligned correctly.
Step4: Personalise Your Design (Optional)
If you would like to personalise the design, open the blank version of the circle and add your chosen text into the centre. Adjust the font size and positioning so it fits neatly within the space, then set the text to engrave before saving your design.
Step5: Cutting & Engraving
Ensure your material settings are correct for your chosen wood, then run the job to engrave the design and cut the shape. Allow the machine to complete the process fully before removing your piece.
Step6: Sanding & Finishing (Optional)
Once removed from the machine, lightly sand the surface and edges if needed to remove any burn marks or residue from cutting.
You can also paint, stain, or seal the wood at this stage if desired. Make sure any finishes are fully dry before moving on.
** if making scented do not seal it - Sealing (with varnish, lacquer, or spray sealant) closes the pores of the wood. Since the scent works by soaking into those pores, a full seal will stop the wood from absorbing and releasing fragrance properly.
Partial Sealing (Best of Both Worlds)
If you want a nicer finish and scent:
- Lightly seal the front only (especially if it has engraving)
- Leave the back unsealed so it can absorb the oil
This helps keep the design looking clean, prevent oil marks on the front, still allow the scent to work effectively
Extra Tips
- Avoid thick coatings like resin or heavy varnish
- If painting, keep paint minimal or only on certain areas
- Always apply scent to the unfinished side
Step7: Make It Scented ( optional )
Place your finished piece on a protected surface and apply a few drops of your chosen essential or fragrance oil directly onto the wood, focusing on the back or edges to help avoid visible marks on the front.
Allow the oil to slowly soak into the wood for several hours or overnight. For a stronger scent, build up in light layers rather than applying too much at once.
Avoid over-saturating, as excess oil may drip or stain surfaces. Once fully absorbed and dry to the touch, your hanger is ready to use. You can refresh the scent at any time by adding a few more drops.
For longer-lasting results, store it in a small bag when not in use and choose stronger oils such as sandalwood, vanilla, or pine.
Remixes
You may also like

Father's day car charms bundle. Wooden car ornament laser cut. Rear view mirror accessory. Dad car decor. Car accessory. Driving quotes svg

Hanging Rearview Mirror or Visor Clip- Daddy Please Drive Safe Bible Verse- Father's Day
Wall hanging of worlds Greatest Dad with the worlds greatest dog

Hand-Drawn Father's Day Engraved Wood Slice Ornament (xTool F2 Portable)

Laser Cut Wooden Ford Car Enthusiast Air Freshener with Blue Ribbon

Best Mom Ever Wooden Heart Ornament Laser Engraved, Floral Frame Design, Birch Plywood 3mm, Elegant Hanging Decor for Mother’s Day

Lawn Mower Father's Day Display

Dad Joke's Fridge Magnet

Laser Cut Super Mom Cake Topper for Mothers Day Celebration Super Mom Red Mirror Acrylic Cake Toppermirror acrylic Material
Laser Cut Wooden Car Air Freshener Ornament with Hanging Rope

Wooden Gift Tags with Father's Day Messages

Two Different Heartfelt Scenes Made From Wood as a Keepsake for Mother's Day
Happy Mother's Day Fridge Magnet

Father's Day Themed Wooden Shapes and Dad Appreciation magnets

A Mother's Love Knows No Bounds Heart Shaped Hanging Plaque

Father’s Day Tie Magnets SVG XCS Bundle | Funny Wooden Dad Gift Set | Laser Cut Design File Download

Father and Son Fishing Quote Wooden Wall Hanging Ornament

