stephcreated

Report

[Laser cut and engrave] Patio Hanger — Project made with xTool M1 machine for Laser cut and engrave.

Patio Hanger

Instruction

PatioHanger1

.xcs

Application scenario

Laser (90min)

Machine & module

xTool M1

10W

Compatibles · 12

Material used

1/8"(3mm) Birch Plywood

3mm Birch Plywood

343

Information

      I love sitting outside on my patio, having a nice cold drink while bbqing so I thought why not make a cool sign to display on my back patio. This sign is really simple.

30creatorschallenge

outdoor

Instruction

Step1: Design

Preview

5 More images

Create your design
- This was created in a different program and I imported it .
Create a 11.5" x 11.5" diameter
Clean up an SVG that needs to be cleaned up. Like the beer mug for instance.
- There's a lot of unnecessary objects that can be delete and need to be united.
- Delete some of the inner nodes so that insides of the mug do not cut.
Arrange your objects on the board.
- Select all the objects “copy and paste”
- Make sure the objects on the board are scored and the others are set to cut

Step2: Laser

Preview

Double check all your material settings and automeasure your material.

Step3: Paint & Assembly

Preview

I used paint pens for this projects since most of the objects were small enough.
I also used craft tweezers to set some of the smaller pieces into the smaller slots of the beer mug.
The scored lines will make it easier for all your objects to be glued to the board.

Comments