WYu

Report

[Laser cut and engrave,Blade cut] Laser Cut Wooden Rabbit Geometric Art with Stand — Project made with xTool P3 machine for Laser cut and engrave.

The Easter Bunny

Third Prize in 2026 Easter Contest

Atomm Featured

Instruction

The Easter Bunny

.xcs

Application scenario

Laser processing、Blade cut

Machine & module

xTool P3

5W, 80W

Compatible xTool Machine

New

10W, 20W

F2 Ultra UV

15W

F2 Ultra

40W

F1 Ultra

20W

5W, 10W

5W, 10W, 20W

D1 Pro

5W, 10W, 20W, 40W

55W

10W

10W, 20W, 40W

M1 Ultra

10W, 20W

P2S

55W

Material used

1/8"(3mm) Basswood Plywood

1/8"(3mm) Faux Rosewood MDF Board

1/8"(3mm) Walnut Plywood

1/8"(3mm) Bamboo Plywood

1/8"(3mm) Cherry Plywood

187

4252

Information

      Using meticulous assembly craftsmanship, I artistically reinterpret Easter elements, giving traditional symbols a fresh visual dimension and a contemporary feel.

Instruction

Step1

https://x.com/yuwang12082025/status/2033722319731122259?s=20

1.I used different canvases to distinguish the various materials you will be working with.

2. Please note that I made distinctions on the eggshells. There should be three main eggshell layers: one slightly wider layer serves as a base to support the semi-transparent acrylic. You can hide an LED strip behind it, which may produce a nice effect.

3. I have separated the number of cuts required for each layer. Keep in mind that this design needs a certain stacking thickness to achieve the desired effect.