crnrstne

[Laser cut and engrave] Lighted layered Easter cross — Project made with xTool S1 machine for Laser cut and engrave.

Lighted layered Easter cross

教程

He is risen cross

.xcs

应用场景

激光 (120min)

机器与模块

xTool S1

20W

使用的材料

6 mm blondewood

6 mm blonde wood

123

1684

信息

      I am fascinated with multi-layered and light projects. I combined both to create this Easter Cross.

BeIn30Creators

教程

步骤1: Dessign

Took 3 graphics found on my paid graphic site that I have commercial license for and I edited all 3 to create the final product. Due to limitations of my ability and functionality of XCS I did most of the design in Lightburn and exported as an SVG file and imported that into XCS for final editing and processing.

步骤2: Processisng

Lighted layered Easter cross instruction: step 2 - Processisng

预览

I processed 2 cut tout crosses, 1 smaller cut tout for top and the back with the scripture and the light cable cut out. I then processed the sun and small crosses cut outs.

步骤3: Assembly Prep

Lighted layered Easter cross instruction: step 3 - Assembly Prep

预览

Sand all pieces delicately, coat back and sun and small crosses cut tout with Rustoleum 2X flat white primer. all other cross cut touts were sanded and made to look rustic. Assembled all large crosses by gluing with clear gorilla glue. Each piece was done individually. I then installed the light kit attaching to the inside with 3m tape. I then glued to the two sun design to the top cross cutout and tested for proper operation.