Engraved Glass Cup

Import the file into XCS software and connect the device.

Use the water to separate the laser marking colored paper. Paste the colored part to the position that needs to be engraved, and try your hard to drain the bubbles that need to be engraved.

Start engraving after the laser marking colored paper dried (you can use props such as a hair dryer) , scrape off the colored paper when you finished.

Notes

1.You need to manually scrape off the extra colored paper after engraving, so you better control the size of the laser marking colorled paper to be slightly larger than the pattern.

2.The text in the file comes with system, you can change the content and size of the pattern according to your own preferences and the size of the glass.

3.You can remove the baseplate of the machine and use the raised pillar if the height of the cup is exceed.