Report
![[Laser cut and engrave] Customized Wedding sign](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8f7da6a0-c7eb-4994-b249-d9bf95d107eb?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Customized Wedding sign
Instruction
Weddingsign
.xcs
Application scenario
Laser processing (60min)
Machine & module
xTool S1
2WMaterial used
30X60cm glossy black acrylic
129
2115
Information
Create a wedding display sign together, the contents of which can be modified to suit.
Instruction
1
Step1: Import the XCS file
.png?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
Start the machine, open the xTool Creative Space on the computer, drag in the required XCS file, adjust the parameters.
S1-2W
processing type：engrave
power: 100
speed: 200
Lines per cm：300
pass: 1
2
Step2: Put in acrylic
.png?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
Remove the film from the acrylic that needs to be carved, and then proceed with infrared engraving.
3
Step3: Complete
.png?x-oss-process=image/resize,m_fill,w_1500,h_1125,limit_0/interlace,1/format,webp/auto-orient,1)
Preview
After the engraving is completed, clean the dust on the surface with alcohol to finish.
Attention:
When cleaning acrylic, do not use rough cloths as they can easily scratch the surface of the acrylic.
Comments
