Western Style Card Wallet

Lets start by cutting a piece of leather 380mm by 110mm, this is big enough to get all your parts cut.

After your parts are cut, you can apply coats of neatsfoot oil, and dye or stain your leather.

For my example I dyed my leather before cutting and engraving.

Make sure you place the corner accents on the correct corners. To do this your star should be pointing up straight on each corner.

Now using a saddle stitch, stitch the top sections of each accent to the body of the wallet. 

NOT THE SIDES!

Once you have done all four accents, then you can start at any corner and saddle stitch all the way around the wallet.

Now take your smallest beveler and shave off the edges of the wallet front and back.

Now take a medium grit sanding paper or block and sand the edges till they are smooth and even.

If you have a sanding grinder that's even better.

Now reapply some dye / color to the edges.

After you apply the dye, use a gum trach and burnish your edges as best you can. 

Then apply a edge coat to your edges.

Let your edge coat dry and you are ready to use your new wallet.