Report
![[Laser cut and engrave] Basic Leather Wallet](https://storage-us.atomm.com/resource/xtool/community/attachment/xtool-community/c30bc7b8-f807-4bae-99df-d978e8804d95.png?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Basic Leather Wallet
Instruction
PocketSections
.xcs
Show 2 more
Application scenario
Laser processing (45min)
Machine & module
xTool F1
2W, 10WAccessories
xTool F1 Slide Extension
Material used
2-3 oz Leather
200
2532
Information
These files will make a leather wallet with 2 card pockets and slot for cash.
You will need 2-3 oz leather (1-1.5mm thick), and some thread.
You will also need the slide extension if you are using the F1.
Instruction
1
Step1: Select your leather
I recommend a 2-3 oz leather, otherwise you will end up with a very thick wallet.
If you are using a F1, you will need a veg-tan Leather since the F1 can not cut through chrome tans.
If you are using a P2 you should be able to select and cut any 2-3 oz leather.
2
Step2: Attaching the pockets
First thing you will have to do is stitch the shortest row of stitch holes on the pockets to your inside sections. Make sure to do both sides.
3
Step3: Stitch Time
Now using a saddle stitch, just start at one end of the L shaped stitch holes and work your way around.
Do this to both sides.
Once you have done both side you are done.
If you want to get real fancy, you can bevel, and burnish your edges.
Enjoy!
Comments
